KitchenIntermediate
Replace Kitchen Faucet
Time
120–180 min
Steps
7
Pre-check
3 items
Skill
Intermediate
Scope
Replace a kitchen faucet: shut off the water, remove the old single or two-handle unit, set the new faucet, reconnect the supply lines, and test for leaks.
Safety
Read before starting
Shut off water; use basin wrench safely in tight spaces; wipe spills promptly.
Pre-Check
3 items · complete before you start0 / 20 complete
Steps
Shut Off & Prep
- Close valves; test faucet
- Clear cabinet; set light and towels
✅Continue Gate:Water off and access ready?
Disconnect Supply Lines
- Use basin wrench to loosen nuts
- Catch residual water in bucket
Remove Old Faucet
- Remove mounting nuts
- Lift faucet; clean deck
Assemble New Faucet
- Install gaskets/putty per manual
- Attach supply lines to faucet
✅Continue Gate:Gaskets and seals correctly placed?
Mount Faucet
- Insert through sink holes
- Tighten mounting hardware evenly
- Align faucet straight
✅Continue Gate:Faucet secure and aligned?
Reconnect Supplies
- Hand-tight + 1/4 turn on compression
- Avoid cross-threading
- Open valves slowly
✅Continue Gate:No drips at connections?
Flush & Test
- Remove aerator; flush debris
- Check hot/cold orientation
- Inspect for leaks under sink