Skip to main content
    Pro Reference Trades Suite
    Sign InCreate accountAdminUpgrade
    All guides
    Laundry RoomIntermediate

    How to Connect a Washing Machine

    Time
    60–120 min
    Steps
    5
    Pre-check
    5 items
    Skill
    Intermediate

    Scope

    Connect a washing machine to water, drain, and power with correct standpipe height, secure hoses, and level installation.

    Safety

    Read before starting

    Turn off water. Use GFCI-protected outlet where required. Ensure standpipe is properly trapped and vented. Lift with help.

    Pre-Check

    5 items · complete before you start
    0 / 21 complete

    Steps

    01

    Position and Prepare

    • Unbox and remove transit bolts per manual
    • Place pan if used and set washer near hookups
    • Verify valves are off; place towels and bucket nearby
    ✅Continue Gate:Area clear; valves off; transit bolts removed?
    02

    Connect Supply Hoses

    • Attach hoses to washer HOT/COLD ports (hand-tight + 1/4 turn)
    • Attach other ends to shutoff valves; keep hoses untwisted
    • Open valves slowly and check for drips at both ends
    ✅Continue Gate:Any leaks at hose connections?
    03

    Connect Drain Hose

    • Insert drain hose into standpipe to recommended depth (6–8 in)
    • Secure with strap; avoid airtight seal to prevent siphoning
    • Verify P-trap and vent present on standpipe
    ✅Continue Gate:Drain secured and not prone to siphon/overflow?
    04

    Level the Washer

    • Place level front-to-back and side-to-side
    • Adjust feet until level; lock jam nuts
    • Confirm washer does not rock
    ✅Continue Gate:Washer level and stable?
    05

    Test Cycle and Finalize

    • Plug into 120V outlet
    • Run cold short cycle; watch fill and drain
    • Check for leaks, vibration, and abnormal sounds
    • Re-check hose connections after first cycle
    ✅Continue Gate:No leaks or excessive vibration observed?